OK we now have this fixed but it makes no sense. Either this is an issue with the TP-Link or the CCTV unit. When the remote port of the router is set to 8080 you can get to the router but then this...

I've now port forward Telnet on the device (it's a ecosense dedicated mircos CCTV box) and the telnet works. Just port forwarding to 80 or 81 is refusing to work. Any ideas? I wonder if it's the CCTV...

I've now discovered you can only change the management port when physically connected to the router. I've done that, it's still refusing to port forward 80 or 81

Just had another look while at the physical router instead of remotely. Checked the online firmware update. Turns out we are already on the latest update yet Port Forwarding just doesn't appear to be...

Model : Hardware Version : Firmware Version : ISP : So we have a big issue. We've replaced a router that connects to CCTV. Replaced with the VR400. The router is, as usual, 192.168.1.1 and CCTV is...

You probably need to port forward to the MFD on port 993