@SirFin Nope, the firmware for the C7 is not allowed to be uploaded into the A7, you may try this one:...

@ax50user Hi, that probably is because there is the data transmission is recorded when it is getting past through the access point, so it will not record the clients connected to the access point....

@fsm1968 Hello, The AX20 is compatible with the Deco M5, so it's OK to connect them together. However, Deco M5 can't build a mesh network with non-Deco devices, it can only build a mesh network with...

@Zorro78 Hi, thanks for asking. As far as I know, the NAS should be acting as a network device, so it should be plugged into the C7 with an Ethernet cable, but not via the USB. As for the recommended...

@BloNET Is there a WAN IP address on the AX6000 after the configuration? If there is already an IP address, try to change the DNS server to 8.8.8.8 and 8.8.4.4, then reboot it and confirm. If the...

@Crepo Is this device connected to the A10 via 2.4G or 5G? How about the actual speed on it? How about the internet activity, are they normal even with this unstable ping?