Kevin_ZOffline
Following: 2Followers: 538
Forums/ Wi-Fi Routers
2020-02-18 03:36:23
Re:AX50: too slow on ISP speed test compared to actual link speed
@minmossi Thanks for your information, I got your point. Try to adjust the position of the antennas. Below is the attachment you can reference. After that, try to test the speed you can get and show...
0HELPFULS
Forums/ Wi-Fi Routers
2020-02-18 03:20:22
Re:how to pass through vpn
@c7b3rx I see, thanks for your valued reply. And glad to hear that you figured it out by changing the protocol type. Now you can enjoy the VPN connection and internet. Best regards.
0HELPFULS
Forums/ Wi-Fi Routers
2020-02-18 03:10:33
Re:Temporary connection to mobile on Archer C7
@Markyyys Hello Mark, the Archer C7 does not support 3/4G router mode, it cannot work with a 4G dongle. You can enable the WDS bridging function and connect it to the mobile hotspot. Below is the...
1HELPFULS
Forums/ Deco
2020-02-18 03:03:57
Re:Cannot configure IPv6
@BarryTreeg Hello, please connect your cellphone to the host network, not guest network. You can disable the satellites and use main Deco only and verify whether you can toggle on the IPV6 switch. If...
1HELPFULS
Forums/ Deco
2020-02-18 03:00:00
Re:Deco App Mesh M4 not seeing Sonos, HP printers online, but they are!
@Kockel Hello, do these devices obtain IP addresses and gateways with DHCP? Try to grab one of the devices which does not show up as online and try to access internet, like downloading, or streaming...
0HELPFULS
Forums/ Deco
2020-02-18 02:54:10
Re:My stationary PC can’t see the wireless connected a Canon Printer
@Nicolaisen Hello Henrik, what is the current network diagram? You mentioned that the PC is wired to WAN side of Deco's, it is normal that it cannot access the device in the LAN due to the...
0HELPFULS
1224622472248...