@Serious_joker09 I see. What's the reason that you choose Static IP on the WR820N WAN? What if you choose Dynamic IP, will it receive a correct IP address from the ONU modem? If there is no...

@Lukraun From what you are describing, it seems that the 2.4G channel width may be limited to 20MHz when the Smart Connect is enabled, this mostly happens when there is a lot of interference with the...

@My.Archer_C20 Follow this guide to block a device on the Tether app: https://www.tp-link.com/support/faq/2584/. If you are not seeing the same setup menu on your Tether app, please show us some...

@ssateneth Hi, the firmware of the C5400 seems quite old, try to install the latest firmware on the C5400, then reset it to factory defaults, reconfigure it from scratch, don't modify the Advanced...

@Juddie Can you explain the issue you are experiencing in detail? Below is the guide to configure the Parental Control setting on the C54, be sure that the router is working as the main router:...

@TollasAron Hi, it seems you are requesting the same as cata2k2k in this post. As we replied there that the AX20 doesn't support the USB standby or spindown feature now. We will record this request...