onemoarLV2Online
Following: 0Followers: 1
Forums/ Deco
2020-07-23 15:31:13
Re:【Resolved Solution】Fixed the issues after upgrading to firmware 1.4.0 of Deco M5
sadly its been my experience these devices do not work well wirelessly depending on how much interfereace you have, how many clients you are using and the fact that the router mode in the firmware is...
0KUDOS
Forums/ Deco
2020-06-11 17:48:58
Re:【Problem Solved】Fixed the issues after upgrading to firmware 1.4.0 of Deco M5
@Fentanyl are the slave decos directly wired to the host switch/router I know it says you can run these devices wireless but it is HIGHLY recomended that every ap have its own wired ethernet...
0KUDOS
Forums/ Deco
2020-05-14 19:14:01
Re:【Problem Solved】Fixed the issues after upgrading to firmware 1.4.0 of Deco M5
most of the people complaing and blaming the firmware and providing no real debugging information well I installed upgrade X does not make upgrade X the only possible cause if you don't provide...
0KUDOS
Forums/ Deco
2020-05-11 20:07:26
Re:Deco M5 in AP mode with wired devices on router
yep in AP mode its just anouther device on the network the decos and any devices connected to them will get a IP in the same DHCP range as the router
0KUDOS
Forums/ Deco
2020-04-29 19:13:02
Re:Ability to disable DHCP in router mode
not a enterprise device, residential device stop using residential devices for enterprise applications the way I have it setup is Router (r6250 running ddwrt) which provides the dhcp and nat two...
0KUDOS
Forums/ Deco
2020-04-29 18:53:29
Re:Ability to disable DHCP in router mode
for now just make sure any devices with static ip's are outside the dhcp scope honstly as a router the deco units suck as a mesh ap they are great solution as stated before run them in ap mode and...
0KUDOS