quadrophenicLV2Online
Following: 1Followers: 0
Forums/ WiFi
2019-09-18 16:39:21
Re:1 Gbps ethernet, but only 150-200 Mbps WiFi.
@Lynild well ironically I have just got home and decided to retest my own AP and I am only getting around 300mbps on 5ghz. I have previous test results in the same setup which were around 500mbps....
0HELPFULS
Forums/ WiFi
2019-09-18 13:32:47
Re:1 Gbps ethernet, but only 150-200 Mbps WiFi.
@Lynild It depends on a lot of factors. I can get around 700mbps+ on my EAP225 but this is only achieveable on the 5ghz band. Strangely this dropped to around 500mbps when i enabled mesh. Create a...
0HELPFULS
Forums/ WiFi
2019-09-02 12:09:01
Re:EAP225 Outdoor and my Ring Camera
Hi, which version of the ring camera are you using? I have 2 spotlight cam's (battery versions) and one of them is an absolute nightmare. Similar to what you are describing. Wifi signal varies...
1HELPFULS
Forums/ WiFi
2019-08-14 13:55:43
Re:Oc200 Controller offline then online again
Stop using static IP on the OC200. Set it to DHCP if you are using DHCP reservation on your router
0HELPFULS
Forums/ WiFi
2019-08-13 07:54:04
Re:Problems with setting up my topology
To perform the first time set up i would try as Forrest suggests by connecting your laptop wired to the switch/router. If your laptop is connected via WiFi on the EAP there will be problems if the...
0HELPFULS
Forums/ WiFi
2019-07-30 11:58:56
Re:Re:Recommendation for home office
I would consider getting an additional PoE switch for the living room. This will allow you to connect and power the OC200 and the EAP225 without the need for additional injectors. I would also...
1HELPFULS
1456...