Hi @Byteguy, Do you have band steering on? Force dissociation? Turn these both off. Clients with weak signal may be bouncing band and forth between bands / AP's. Also I'd change the 5.8GHz radios to...

Hi @Byteguy, Remind me of your setup. You're using CPE's to connect each AP back to a central location? Did there end up being any wireless MESH or just point to point long range Wifi for each pier?...

Hello @Prevencardio, Neither the EAP nor the Omada Controller (software or OC-200) will do what you are asking. You need something with Layer-3 control like a Layer-3 switch or router. You would then...

What's really strange is that if I go to Omada cloud first, and then connect into my OC200 it's fine. But if I go direct to the IP address of the OC200 on my LAN, then get the issue.

Hi @dsmith5428, In the DHCP settings page. 1) Set the fall back DHCP to 192.168.100.254 2) Set the 255.255.255.0 3) Set the fall back gateway to 192.168.100.1 (or whatever your router is) 4) On the...

Hi @dsmith5428, Sounds like we are making progress. All routers have an admin page. https:// arris dot secure dot force dot com/consumers/articles/General_FAQs/SB6190-Web-Manager-Access But, it...