Set the value to 0.01 -> no improvements. 1 antenna vertical, the other one horizontal -> same behavior, no improvements. Both antennes vertical, TX rate set to MCS7 -> no improvements, sorry:

This are my test settings: Tried with QOS and Short GI, but still during copy operation from a NAS to an android phone on the laptops heavy ping drops: Reply from 192.168.1.1: bytes=32 time=34ms...

Ya, thats correct, its from the emulator page. QOS is deactivated. Will have access to the device in one hour. Will enable QOS and report back. Thank you for your help mate ;)

FWA - 'Frankfurter Wasser- und Abwassergesellschaft mbH'? :) Anyway, then please advice, where my problem is. As I already said, most of the wireless settings are stock and look similar to this (this...

Hey guys, got yesterday a new WBS210. Connected 2 5dbi TP Link omni antennas to it. All settings are very untouched, only set the channel width to 20mhz. 2 Laptops are connected -> Windows shows...

Got a WBS210 last week from Amazon. Attached 2x 5 dbi omni antennas to it, played a bit with tx power settings, channel width, auto channel, but it was always worser (range and speed) than my old...