@irbaaz Alternate configuration: If you have Modem/Router Combos from the ISP, try the following setup. You will need to setup static Routes on each router to get the separate networks to talk to...

@irbaaz Ideally your setup should look like this: You can either create VLANs on the default LAN port or use the extra LAN ports on the ER605 to create separate networks. Each Network/VLAN should...

@US007 Thanks for the clarification. TP-Link may have the IP in the list by mistake, or something changed that they are not aware of.

@irbaaz You don't need to clone MAC Addresses. When the ISP Modem/Router combo is put into "Passthrough Mode", it turns it into a ISP Modem only. Right now the Modem side gets the WAN IP and the...

@US007 IP locations can be tricky. The location can be based on the office address that was used when the IPs were purchased. If I turn off location on my devices, it stops using the GPS and tries to...

@michealmyers VPN Split Tunneling: Only specific Traffic goes over the VPN, some traffic stays local. Example: Working from home - Employee connects to the company VPN - Company data is routed over...