Forums/
Wi-Fi Routers
2024-11-08 13:29:48
@wepeetech Update your AC1200 v1 to the latest FW from here. Switch to AP mode an configure using this guide (Case 1). Use the guide you posted for configuring the print server.
0HELPFULS
Forums/
DSL Modem Routers
2024-11-07 20:10:25
@Raadghast If you use an ONT device you can just switch VR2800 operation mode to wireless router mode and use its LAN4/WAN port to connect the ONT.
0HELPFULS
Forums/
Range Extenders
2024-11-05 22:49:11
@Based_On_Cringe Go through this thread for more details. It's about general wireless connection, not a particular router or wireless device.
0HELPFULS
Forums/
Wi-Fi Routers
2024-10-31 18:10:53
@N3M3S1S There's no setting for this feature - it's enabled by default
1HELPFULS
Forums/
Wi-Fi Routers
2024-10-30 20:27:29
@N3M3S1S Check this thread.
1HELPFULS
Forums/
DSL Modem Routers
2024-10-27 22:14:38
@elirr1111 It is suggested to update to the latest release because it "Fixed a NetUSB-protocol vulnerability". If that doesn't solve your current problem most probably this is a FW limitaion.
0HELPFULS