@ArcherC50help Here's how to configure a router in AP mode. If the router has a dedicated operation mode for AP, you should use its WAN port for uplink connection to your main router. You should be...

@Asher09560 Download and update the router FW from its support page - here ( Published Date: 2024-07-05 ). Here's how to update the router firmware - Case 2.

@Hunter_JG You just need to enable the correct band and set the wireless network SSID (setup IoT network guide): After that, you should be able to see the IoT SSID and connect to it.

@YusufCanbolat There's two options: You can set your modem in bridge mode avoiding double NAT - details. The other option is to open the Remote Desktop port on your modem for the WAN IP address of...

@jaunt Have you tried to login the second AX23 (which is in AP mode) via web browser. This is a screenshot from Archer C64 in AP mode on which you can turn off its leds: On your second point - you...

@2JJ Your issue description sounds like the symptoms in this thread, despite the fact that the router FW has been updated several times since then. When using the guide for configuring a router in AP...