@Feriman This probably happens because you use AX53 in router mode and you have disabled its DHCP and NAT features to use it as an AP. According to your topology diagram AX53 should be used in AP...

@Alex12121212 BE400 is an entry level Wi-Fi 7 router and its hardware doesn't support 6GHz band - technical specs. You can't use a USB network adapter either, because its USB doesn't support it -...

@dervo This should be possible if you factory reset AX23 and use the WPS method for pairing the two routers. While pairing the routers keep them closer to each other and once done you can move the...

@HuntyFtw Now you could see the changelog (v1.4.4) on the global English support page - here.

@Jdhn For the Middle East usually an EU firmware is used. Here's how to configure the bandwidth control. If you still have problems configuring this feature contact your local support for further...

@Jdhn If your router firmware region is EU (that's on the bottom sticker) update (Case 1) it to the latest release 1.13.9 - here and test again.