@GiantHogweed Based on screenshots in edpnet your DSL modem WebGUI should look like this:

@GiantHogweed You may try the following: To configure a Proximus B-Box 3v+ in bridge mode, you need to disable the PPP (PPPoE) connection on the modem's interface and then connect your own router to...

@GiantHogweed Here's a guide on how to bridge a DSL modem router and use a wireless router connected behind, thus avoiding double NAT in your LAN. In fact, other brads DSL modem routers have so...

I believe that in this particular case an upgrade path should be defined by @Kevin_Z in the thread, where the AX53 new FW release announcement was made.

@Rarespawn Did you check if the devices connected to the A7 receive a proper network settings i.e. an IP address in your main modem DHCP range as well as a valid Gateway and DNS.

@Slimmy6828 Since SR203 is a dual band wireless router, RE205 would be a better choice than WA850RE (which is a single band RE). Despite that, they both should be able to connect to the SR203 as long...