@manjtb350 Sure, first update the RE200 FW, reset the RE200 to its factory defaults and then use this guide to connect RE200 to the EasyMesh. Upon successful wireless connection, connect the ethernet...

@Kernow_Yardie For UK the EU region firmware is used. So you should be able to use this update for your device. Double check the VR1800v bottom sticker for FW region and HW version - details. Be sure...

@Kernow_Yardie Here you can find the latest FW release for VR1800v. Update the FW and then test if there's an improvement.

@alf2365 There's a similar issue - check this thread. You may contact your local supoort for further assistance or your ISP if the device is provided by them.

@manjtb350 @David-TP If you set RE200 in AP mode it won\t be in mesh network nor if you connect it with an ethernet cable - it soens't support mesh with an ethernet backhaul - check here. If your...

@Nick_F From your description all devices in your local network are in the same broadcast domain, since you're using unmanaged switch and APs. What about if your mobile is connected to the AX73...