@Purya_Sadin I would if I had it. Non public beta FW releases are provided only by TP-Link admins regarding a specific issue that should be resolved - here's an example with VR600.

@Ronaldoasad7 Try updating the RE505X to its latest FW release - here (v1.0.13) and then test again. Here's how to update the FW.

@Arushi1203 For resetting the RE you have to press the reset button for about 10 seconds while it's powered on. Blinkin power led means: "The system is starting up or firmware is being upgraded." Try...

@XiTo If your modem is not provided by an ISP then most probably its FW is standard. As for the HW v1.20 and HW v1 it is stated that: (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8...

@Despero This is probably caused by one of your client devices - it could be IoT device or similar. Can you describe what devices do you have in your local network ?

@RehoDesign AX12 is an entry level AX series router which doesn't have Home Shield feature implemented. Despite that, you can still configure its Parental Conreols to monitor internet usage of a...