@Flashnet1 Probably it would be best to contact your local support/retailer regarding any of the misbehaving devices. For that purpose you have to open and test all the devices, whether they would...

@sbatis This should be straight forward operation - check this story. Pay attention on the VLAN ID configured only on the router behind the bridged modem.

@Dunk-c All TP-Link routers start by default in router mode. You probably switched to AP mode before setting up TP-LInk ID on this one.

@lMarcel On the contrary - you could still build a mesh, even connect the third X50 wirelessly. Use the blue text hyperlink from my previous post - that's the guide for setting Deco units in AP mode...

@Dunk-c Probably AX20 v3 is with a different WebGUI. Try the following: Switch to route mode, setup TP-Link ID and then switch back to AP mode - then test. Some of the features configured in router...

@Dunk-c Missing Advanced menu is usually a sign that you're using the router in AP mode. Is that the case ? If that's the case you should know that some features are not available when the device is...