@SteveF161 When using RE315 as a range extender it's DHCP server should be off so it can provide IP addresses from your main router. Most probably the reason for your issue is that RE315 signal is...

@MikeSay When connected via ethernet cable RE600X should be set in AP mode - use this guide. Follow this thread to position your RE for best speed and performance.

@saschko1 The default IP address upon reset should be 192.168.0.1. Best way to access the router is to connect a PC/laptop with an ethernet cable to its LAN port. If after reset you still can't...

@Jeff1005 Disabling Smart Connect feature will allow you to separate the two bands (2.4GHz and 5GHz). In some routers Virtual Setrver is called Port Forwarding which is the same featire under a...

@David_in_Boston Don't worry about the tplinkap.net resolving. When you're connected directly to the AP it will resolve to the local IP address of the AP. Same mechanism is used for some additional...

@montaserj Try resetting the RE200 to its factory defaults - press the reset button for about 10 seconds. If the issue persists contact your local tech support for further assistance.