@CosimoZ You can file a feature request here: The other option would be to use a router from the list I mentioned in my first post, connected behind the MR400 and then connect all your devices to...

@Yesrab Unfortunately the FW region is not interchangable, i.e. you can't update with FW release for US region a device with EU region and vice versa. Most probably you'll get an error message during...

@Yesrab Most probably your router FW region is (US) - this can be seen on its bottom sticker - details. The Federal Communications Commission (FCC) limits the allowed channels in the 2.4 GHz band for...

@skibidipspfein That depends on your router wireless settings, because the RE315 only copies the host wireless network security type. "Once a host network is selected, the SSID and security type will...

@Xarsas " All of the WAN ports are set up as Dynamic IP's and each modem has DHCP disabled. " If MR600 is not configured in bridge mode ER707 won't obtain its WAN/LAN3 IP address. MR600 doesn't...

@CosimoZ The feature you're looking for is described here.(Check the devices in the section This Article Applies to ). Unfortunatelly MR400 doesn't have this feature implemented.