@AlanHockey Reset the RE to its factory defaults by pressing the reset button for 10 seconds. Use a PC with an ethernet card and set its IP address to 192.168.0.2. Connect the PC with an ethernet...

@AlanHockey When you use the http://tplinkrepeater.net make sure that you're connected to the REs wireless SSID. If the issue persists use the REs IP address to login. Its default Ip address is...

@booo A possible reason for the missing menu could be that you're using the device in wireless router mode, but not DSL modem router mode. You can switch to DSL modem router mode and check for...

@FJ04 Since C6 doesn't support session limit, a possible solution to this issue could be to schedule a reboot for your router every day at night:

@Cassiopeia23 I have to admit that the Easymesh is still in development and there's a lot of work to be done so it could be as agile as a user would want it to be. I am seeing lately some whole home...

@akb_here What I've meant is that you can easily check the C80 DHCP server pool here: If its LAN IP address is 192.168.0.50, its DHCP pool would serve IP addresses in 192.168.0.0/24 subnet. The IP...