terziyskiLV7Online
Following: 0Followers: 42
Forums/ 5G/4G Routers
2024-01-26 08:17:55
Re:IPsec VPN between two tplink 4G router
@AhmadMasalmeh You may go through this guide to build an IPSec VPN between the two 4G routers. To use the VPN Service, you need to configure Dynamic DNS Service or assign a static IP address for the...
0HELPFULS
Forums/ Wi-Fi Routers
2024-01-26 07:43:35
Re:Archer C7 AP mode suddenly stops working
@Victorlin I was hoping to see these when you use your main router and the C7 is behind (double NAT scenario). Remove all optional settings and test connectivity from your PC before switching to the...
0HELPFULS
Forums/ Wi-Fi Routers
2024-01-26 05:32:44
Re:Does Archer C24 support connecting wired devices while in repeater mode?
@Alihos Yes, you should be able to do that since the LAN ports are bridged to the wireless connection when C24 is in RE mode.
1HELPFULS
Forums/ Wi-Fi Routers
2024-01-26 03:54:45
Re:Should I use 2 Archer C86 routers or use 3 Deco E4 packages
@ChiThien I would go for Archer C86 TBH. Deco M4 3-pack would cover about 372 m2. Of course you can buy a single Deco M4 to extend your wireless coverage further. On the other hand if you'll use the...
1HELPFULS
Forums/ Wi-Fi Routers
2024-01-26 03:16:03
Re:Client keeps reconnect automatically after being blocked
@caidao Double-check your Parental Controls configuration - here's a guide for configuring. You should probably check if your son is using some kind of a VPN client on this laptop as well.
1HELPFULS
Forums/ DSL Modem Routers
2024-01-26 03:01:37
Re:Problem in "Archer VR600 v3 0" There is no internet when the electricity is cut off and back on
@Eng-H There's a newer FW release for your device here. Try updating the FW and then test if there's any improvement. Also make sure that your PPPoE connection mode is set to "Auto" here: Don't...
1HELPFULS
1450451452...