@Sidhant The easiest way to check if MAC address is the issue is to compare your OLD router WAN MAC address clone settings and set the same MAC address to the new router. If that desn't work, you...

@mkfzdmr To isolate a BE550 issue, you can test building the PPPoE session with a laptop and check if you can access the internet - use this guide. In this scenario you have to connect your laptop...

@vivekranu1 You can go through this article regarding placing you routers for optimal reception and performance. Regarding WDS disconnections - it could be a result due to the above topic. You can...

@mak50 If you've checked the Only Allow the Following IP and entered your WAN IP adddress: You should reset the modem and reconfigure from scratch, If you've made any configuration backup prior to...

@Tom-B Try this guide. If you can't find Backup and Restore section then this has not been implemented in the router FW.

@billyrg8 AXE5400 supports both Dynamic IP and PPPoE type of connections. Internet VLAN can be set here: In Mode filed you should select your ISP or if it's not present, use Custom and set your...