@Zatara When RE200 is configured in AP mode you have to disable its DHCP server. In this mode your devices will receive their IP addresses from your main router. Here's a guide on how to setup RE200...

@daBee3 That's exactly what I'm doing - bridged TD-W9960 in front of an Archer C80 authenticating through PPPoE session - the last image is from Archer C80.

@SnaffyNoo Just follow the guide and when you configure the Onemsh you'll see what the mesh is and what it can do.

@Ciderlover AFAIK this will depend on what package you have subscribed with PN. 1.FTTP or 2.Package with a home phone line. In the first case you can swap the PN Hub 2 with the AX10 direcly. In the...

@Walter_dh Are you using the TL-WR940N in access point mode ? As for its optimal wirelss settings I would suggest the following: There could be a strong wireless interference arround you - scan the...

@Kat89 Why don't you ask your client support what kind of a wireless repeater they are suggesting to install in your network. In terms of a wireless repeater this usually is a range extender, but you...