@Marc_21 Ideally they should be connected to the router separately to avoid any bottleneck, but you can connect them in series if there's no other option.

@Marc_21 You can use a switch in the topology like: Router->Switch->AP1 | ->AP2 or use the topology you described. Wireless channels can be set to "Auto". You can set the AP1 and AP2 SSIDs the same...

@EnricoR This was possible with the Access Control for the Old Green UI - details. As you noted, the new GUI Access Control will simply allow/deny the device access to the router's network. I've...

@Boihh According to its tech specs - AX10 doesn't support AX on its 2.4GHz band: The same can be seen in its datasheet as well - here.

@_martincjto Usually this limitation comes from a faulty ethernet cable. Replacing with another, quality made cable of CAT 5E or above should resolve this issue.

@Hassan_binzahid Since you've bought the router in Dubai - their local market uses (EU) FW version and there's no way to use the UNII-3 or ISM bands - they simply don't support them.