@Navin772 If your C6 WAN IP address is starting with "10." then it's a private IP address. If you don't have another ISP provided device (modem/router) sitting in front of the C6, contact your ISP...

@Praveenav If you use AX23 routers then this shouldn't be a problem since it supports EasyMesh (ethernet backhaul as well). To configure EasyMesh - follow the setup video guide at the bottom of the...

@Navin772 A probable cause can be that WAN IP address of your C6 router could be a private IP address. If you ping DDNS and compare the IP address resolved with the C6 WAN IP address, they should be...

@ramki_87 AX10 is capable of doing that. To use the IPv6 DDNS service, you must have a Static or Dynamic IPv6 Global Unicast Address (GUA) configured in your router WAN interface. Otherwise, your...

@Mulloch If you can't see what you're typing, open a notepad and enter the administrative password there, then copy/paste it in the router's login page. If you forgot the administrative password just...

@Chisparro These are the cloud compatible REs - RE450 is supported from HW v4 onward. On the other hand this is the tether app compatibility list in which RE450 is supported from HW v1.