@lionel13 Yes, it is. But you want to configure a port-forward to this IP address. So use this IP address: when configuring the port-forward. If you want to open port 80 for a local device, please...

@lionel13 If you've set a DHCP address reservation (instead of static IP address - it's still from your LAN) then point to that IP address.

@lionel13 This would be the IP address of the device in your home LAN which you want to access from outside. Here's (Case 1) a guide on configuring virtual-server (port-forward).

@Gr3ed You're doing just fine but your router WAN IP address is a private IP address - 192.168.1.214 - details (Step 4). Unless you get a public IP address, this won't work - contact your ISP and ask...

@lemiel You can try the following: Set BE230 in AP mode and connect the two AX53 as a satellite devices to the BE230 via ethernet backhaul, EasyMesh Is available when BE230 works in AP mode as a...

@lemiel When a router is configured in AP mode its DHCP server should be turned off so only the main router DHCP server would provide IP addresses in your network - details. When in AP mode the...