@RichStaf As @SergejKiller posted, you should first set the router LAN IP address within the desired subnet and then set the DHCP IP address pool. That is because router LAN IP address should...

@gtibay04 To Set Up the Extender as an Access Point 1.Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2.Click Change Mode in the top right...

@Martinus A good test would be to use your TP-Link ID to login the second Archer C7 (which works in AP mode in your LAN) and check if it has a similar issue. I guess this will depend on the Archer C7...

@WipedLifePotato Here's the official procedure for recovering a bricked router. In your case you should use Method 1. Here's a video guide for the TFTP method. If these two don't work for you I''m...

@Martinus How often does that happen ? Every few minutes after restarting C7 or just occasionally ? I doubt that double NAT is an issue - just make sure that you have the latest FW release on your...

@Pep79 Follow this post steps to add AX1500 as a satellite to the AX1800 Onemesh network.