@I_want_a_refund It would be better to use as your main router a device which supports VLANs, like TL-R605. You Archer A7 could be used as second AP (in AP mode) to expand your wireless network for...

@David_44 Unfortunately this may be your only option now. There's nothing wrong resetting the device to its factory defaults. Sometimes this is necessary when new features are implemented through a...

@mjsam When VR600 is configured in bridge mode it will automatically relay your ISP given IP address to the device behind it - Ubiquiti WAN port. You public IP address could be either static or...

@BhandT Both devices support EasyMesh. Try reset C80 to factory defaults before adding it to the AX10 EasyMesh. Here's a guide for adding a satellite router to EasyMesh network.

@mjsam Your bridge configuration seems fine - check this post. Make sure that the IP address assigned by the VR600 to Ubiquiti is a public IP address, i.e. if it's a private IP address port...

@jutti TD-W8961N HW v1 is pretty old device, its latest FW release is from 2014 - hence the orange UI. Check this guide for for using WDS in TD-W8961N to connect with another TD-W8961N. I'm afraid...