@Snacr63 Use this guide to configure TD-W9980 in AP mode.

@MishuRO With the second option and Deco X20 in AP mode you'll have Deco mesh. Here's how to setup an ethrnet backhaul with Deco. There's another option - Archer AX10 recently got an updated FW with...

@tcsevens Check this post. The issue you have is probably caused by the ISP Bell Canada router.

@Arquiteto That's correct. If you post the make and model of your modem it will be clear if it has a NAT and works as router or plain modem. In case it's a router and it does NAT, then all 3 Decos...

@Arquiteto I suppose you are targetting a mesh network for this premises. There are two options involving PoE: 1) Using 3-pack Deco X50-PoE aither in router mode or AP mode - it depends on the...

@SharkBank If you have a range extender working in AP mode it should be connected to a router with a DHCP service running on it. Check that router's DHCP server settings and make sure its IP address...