@york146 This is a known behavior in AP mode - it's caused by the Smart DHCP feature. Make sure that the C80 DHCP server is set to OFF (not Auto).

@Lobao83 It could be many things. For start here's the Advanced > Status > Wireless (WDS status): Upon successful configuration your WDS status should be Running. Also, C60 LAN IP address should be...

@Lobao83 WPS won't work in this case. In order to use C60 as a wireless extender you shoud use this guide refering to the WDS feature

@TP-Joe So, did you reboot the router and check if this screen has changed and looks similar to what you expect:

@PCH Many routers support hairpinning (NAT loopback): Hairpinning is a network process where traffic from an internal network that is directed to the network's public IP address is instead...

@Ochmin All hyperlinks in the thread you mentioned are viable except the thread about the recovery procedure, which is here. The latest FW for Archer c20i can downloaded from here. Usually, when you...