@kontroversi Make sure that you're with the latest FW release for your device - observe the bottom sticker to determine the its region and HW version and upgrade if there's a newer FW release. Check...

@marl1 The EasyMesh feature is not compatible with the Deco mesh - see details here. Moreover both router models should support an ethernet backhaul. You have two options: 1.Place your AX53 near the...

@crossmr Make sure that your public IP address (https://whatismyipaddress.com/) is the same as the VR400 WAN IP address: If they are different you might be behind a double NAT or CG-NAT.

@Somewell I would reset to factory defaults and re-configure AX23 in AP mode (Case 1). You already have a NAT from your ISP modem router. This way it would be easier if you want to use...

@Roger_Aussie-1 If I understood correctly your intention is to use your laptop's Wi-Fi to connect to an internet hotspot and share the internet over the laptop's ethernet port to the AX1500. If you...

@JetSwan When in AP mode, AX20 just redistributes the IP subnet of the DHCP server on your main router - make sure that you've turned off the AX20 DHCP server. This behavior can be caused by your...