@Southware There's nothing special about configuring TL-WR841H in AP mode - use this guide for setting it up. You cable connection should be as follows: Mikrotik router LAN port => TL-WR841H Internet...

@Thom_NL Check this link - just before the Q&A section. " *Only one router is needed to build Mesh networks. OneMesh™ supports up to six OneMesh™ devices, including the router. "

@Vabea Make sure that your main router uses wireless channels between 36-48 for its 5GHz band and test again - TL-WA1201 doesn't support DFS channels.

@vikram404 There's no point of using 1-pack deco XE75 over AXE75, if you don't need a mesh network. With the AXE75 you'll have more granular control over the wireless bands, channels and other...

@najo007 Look at the device's bottom sticker to check what's the region of the FW your router has. As a rule, the device must be upgraded only with a FW release from its original FW region (on the...

@neozyy Go through this FAQ to see how you can rename your network name under Windows OS.