@wwwmagnottait Use this guide to troubleshoot your issue. If your C80 Internet IP address is not a public IP address, it can cause the issue described.

@my2108 You should use the port configured for the remote access in the WebGUI interface: Make sure that the IP address you're using in the browser is your public IP address and it corresponds to the...

@WasiMaster You can confirm that you have the US version by the bottom sticker of the router. If you have US FW version indeed - here is the US FW version available with OneMesh implemented. Keep in...

@Ebarlev There are two options for using VR600 in your case: 1. You could try to set VR600 as an AP (using one of its LAN ports for uplink to HALNY) thus avoiding double NAT in your LAN - check this...

@FreakyMood TD-W8961N can only make a WDS connection with another TD-W8961N - check this guide.

@GaryBurc To avoid a double NAT in yor network and use the AX72 64 IP address reservation limit you have to set VR2100 in bridge mode and use AX72 as a router - check this story. In this case you...