@Errefae There's a plenty of tutorials, even videos on how to do that - here's an example with R470T+. There's also a document related to the multi-wan bandwidth aggregation tests via speedtest.net -...

@Errefae That means you can have the WAN ports failover and the WAN bandwidth based load-balace together.

@Errefae I believe that in your case, either would do the job. Check this comparison. R480 is rack mountable (bigger) and has an internal power supply. It also supports up to 30000 concurent...

@Errefae Yes, it has - check the specs here. And yes, this topology should work. Just FYI a pfSense box with dual WAN ports should do the job as well.

@RokK You can't connect two routers in OneMesh - check this FAQ - Q5/A5 and Q10/A10. But you could use the second AX72 in AP mode (Case 1) and have two separate wireless networks, even with the same...

@DrFrank Here's a guide on how to configure and bind your TP-Link ID to your router. Here's a troubleshooting guide for the TP-Link cloud service. Also you can browse through this thread to check if...