@Valar75 You can't see the WDS option since you're using Archer C6 in AP mode. If you switch the device in 'Router' mode it will be where I pointed to. Here's the difference between 'Router' and 'AP...

@Valar75 Archer C6 should have WDS feature implemented in its WebGUI: Advanced > System Tools > System Parameters - here's how to configure. Depending on HW version Archer C50 has this option. Older...

It should be noted that when the device is in 'AP mode' (where OneMesh is not available), it would still emit OneMesh hidden networks, until the OneMesh is disabled in 'router mode'.

@RazAdini You can use only LAN ports 5,6,7 and 8 for configuring IPTV/VLAN service. For more details refer to your device user guide - chapter 12.3.

@adrianx12 If you still keep your Synology RT2600ac, you could combine it with Synology MR2200ac (to build a mesh network - see at the bottom of the page for details about the coverage) and extend...

@madroots Your main concern should be the power grid voltage - 120V in Canada. Look at the power adapters' sticker on every device to be sure that they are compatible with this input voltage (check...