@Abs007 Succesful building of WDS depends on both devices, but in particular on your main router make and model: The following text is from the TP-Link's official WDS guide: "In order to build a...

@alescan While in AP mode your A6 DHCP setting is 'OFF' if I've understood correctly. If that's the case, you can try the A6 beta FW release from this thread and see if that helps. In AP mode you...

@Meowahpanda Follow this guide to configure Facebook Wi-Fi on Archer C50 v4 or v6.

@mantonelli01a You have two options: 1. Since PlusNet hub one doesn't support bridge mode, you can enable its DMZ to your AX6000 LAN IP address and set its DHCP server pool with only one IP address...

@Meowahpanda The reason not seeing the Facebook Wi-Fi is probably that you're using your C50 in 'AP mode'. Switch back to 'router mode' and try again. By the way there's a newer FW release for C50 v6.

@Avit Go through this thread and check the suggested solutions. If you're trying to access C2 via remote network try to use its WAN IP address (it should be a public IP address) instead a DDNS (if...