@PJSc For 15-20 meters distance, I would run an ethernet cable to the garden office and connect the Deco X50 5G unit to the house mesh. The other way you could approach this is to use a Deco...

@EralpN This could happen if you've not set your RE550 DHCP server to off or a bad cable between the router and the RE550. I would set RE550 with a static IP address 192.168.X.254 (X according to the...

@LearnerDriver Make sure that you've set your RE for maximum Wi-Fi coverage: Apart from that the only way to extend your RE wireless coverage is to place it for optimal reception and preformance -...

@John_Dew Go through this thread for how to set your C80 NTP servers in WDS mode and give it a try.

@Toucan This is from the WDS setup guide - here: WDS may be incompatible between different products (even occasionally from the same vendor) since the IEEE 802.11-1999 standard does not define how to...

@Ejazmp If you've set your RE505X with a static IP address 192.168.1.254 then that's what you see in the ISP router WebGUI as a static allocating. You can't change the RE505X universal mode. If...