@Joolsfrank Reset your RE505X to its factiry settings by pressing the reset button for about 10 seconds. Position the RE505X near your router before configuring. Here's how to setup your RE505X via...

@MarioDrone There has been an issue with the 2.4GHz signal range of AX73 v1 in the past, due to a FW update - details. However, I can't speculate if that's the case with the AX73 v2 latest FW...

@MarioDrone 2x AX73 should cover pretty well a 130 m2 premises if they are properly positioned and the walls are not a pre-cast concrete - details. You may consider connecting those two in Easymesh...

@Rich---- VX230v is a home xDSL modem router which has an Easyemsh implemented. EAP225 is part of the Omada solution hence -- Omada mesh. They are not compatible whith each other - details. To have...

@daws0n Check this document - in there you can see in which mode a different RE models can work. There are also a recommendations how to configure MAC filtering depending on the RE working mode.

@Serse Set MR200 wireless mode to 802.11n only for optimal performance. I would experiment with different static wireless channels to check if there's an improvement.- the wireless channel may...