Switches
TP-Link Business Switches are comprised of JetStream series and LiteWave series, which are designed to offer reliable and professional choices to businesses of all sizes. Anything related to TP-Link's JetStream or LiteWave Switches, welcome to ask questions, join discussions and share your experience/ knowledge here.
Switches
Hey All, The configuration below is to show how to use an Omada Switch as a DHCP Server with DHCP Pools, and DHCP Reservation to support Omada Layer 3 Switch Configuration. I have detailed the steps a
By
Death_Metal
3Helpful
95Views
im seeing up a network for our ems office and need to know how to set up port on switch with 2 vlan one will be van 3 for data and secont vlan on port will be on vlan 200 for voip all switch a contole
1Helpful
60Views
I have a Starlink internet router with Ethernet adapter. So basically what I'm trying to setup is fo my wall mounted Ethernet ports around the house. Im just wondering if the setup is possible? Like I
ConfigurationQoS
2Helpful
65Views
I have Tplink Omada ER605 and a 16ports Tplink switch. My question is can I connect the switch directly to Omada and control the bandwidth of each IP connected to the switch?
2Helpful
113Views
Hi, I purchased a TL-SG3428X-M2 recently, I received V1.0 and was very surprised when I heard coil whine from the power supply. It is actually louder than the fan. I am a bit worried it could be a bad
5Helpful
468Views
Hello, I noticed that in the CLI and User Guides recently updated for the SX3008F switch, these now include UI & CLI commands to configure switch stacking, but these are not implemented in the v1.20.0
Firmware Update
3Helpful
108Views
Hi Hello friends, I have a SG3210 model switch, I want to reset the device with cli commands by making a com connection via usb port. but I get an error like this. can you help me Error: Failed to exe
CLINetwork ConnectivityDHCP ServiceConfigurationPUTTY
By
yavuzy
0Helpful
55Views
I put a generic LX/LH sfp into one of the SFP ports. The status came up Green, speed and duplex 1000mb Full. Nowhere does it show the SFP transceiver information Make Model TX Level RX Level When I tr
SFPConfigurationNetwork ConnectivityCLI
1Helpful
63Views
Hi, I have multiple networks in my Jetstream. My main network IP is 192.168.0.0/24 where the PBX server is located. I have another network on another floor (5th) with subnet 192.168.5.0/24. I can ping
1Helpful
60Views
In ipv4, in omada turning igmp snooping on results in flood unknown multicast being turned off In ipv6, in omada turning mld snooping on results in flood unkonwn multicast being on Is there a way to t
4Helpful
171Views