Port Forwarding not Working

Port Forwarding not Working

Port Forwarding not Working
Port Forwarding not Working
2024-10-26 21:10:59 - last edited a week ago
Model: Archer BE550  
Hardware Version: V1
Firmware Version: 1.0.11

Hello everybody,

 

I have a Problem with my Router. I want to forward the ports 443 and 80. I have tried everything (DMZ, disabling SPI and so on), but nothing worked.

Also when i go to the website whatismyip i have a different ip to what it says in the router itself. I tried both IPs but none worked. 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Port Forwarding not Working-Solution
2024-10-27 10:04:53 - last edited a week ago

  @Louitz 

 

If the router internet IP address is different than the "whatismyip" shows means that you're behind a double NAT or CG-NAT.

In this case porf-forwarding or DMZ won't work - they should be the same. Contact your ISP and ask them if they can help you with that.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Port Forwarding not Working-Solution
2024-10-27 10:04:53 - last edited a week ago

  @Louitz 

 

If the router internet IP address is different than the "whatismyip" shows means that you're behind a double NAT or CG-NAT.

In this case porf-forwarding or DMZ won't work - they should be the same. Contact your ISP and ask them if they can help you with that.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options