I have two separate houses where I want to set up HC220 G5 mesh devices. In the first house, when powered on, they transition from the "initializing" mode (blinking yellow light) to the next stage (blinking blue light) in about 1 minute. In the second house, the same devices remain in the "initializing" mode for an indefinite time, ranging from 30 to 60 minutes before progressing. Since both houses have similar conditions, I suspect co-channel interference might be the cause. Attached are images of the channel analysis for both houses on the 2.4 GHz band. Could co-channel interference lead to unusually long initialization times for the HC220 G5 mesh devices?