Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.11.0.0043

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
1567...

Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.11.0.0043

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
116 Reply
Re:Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-07-08 02:39:35

@PowerlineFW 

Just upgraded to 2.8 on 8030p v1 adapters with no issues great you guyz are still working on updates for these adapters! ;)

It's All Good!!! ;)
  0  
  0  
#53
Options
Re:Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-10-12 18:23:29

I have a PA8030 V1 (not pa8030p), i was able to install the firmware 2.8 NVM (https://mega.nz/file/MJMngIgD#ZCDdBo5F1T_bIeGQM2tv8qpgz62lno-2oPAXY9K9o6g) with TL-PA8030P(EU)-170616-2.2.3-BETA.pib provided on this link: https://app.box.com/v/tl-pa8030p. 

 

Will I have some benefits if I try the 2.4-BETA pib? 

  0  
  0  
#54
Options
Re:Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-11-09 12:36:39 - last edited 2020-11-09 12:37:38

 

Hi,

 

I own a TL-PA8010p V2 and a TL-WPA8630P V2 and I was able to put both running on NVM 2.8.

To get the PIB for the TL-WPA8630P V2 I used the PIB backup tool that is on the dropbox.

In my case I tried to update the TL-WPA8630P V2 using the Ethernet cable but the tpPLC was only asking for the BIN, via wifi is asking NVM and PIB, not sure why but the upgrade went just fine.

I believe that everyone that owns a TL-WPA8630P V2 can easily do a PIB backup from their own device, but if you can't I'm adding the one I made.

 

Best Regards

 

File:
TL-WPA8630Pv2.PIBDownload
  0  
  0  
#55
Options
Re:Firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-11-10 21:47:19
Thank you so much for all your help here. I was able to update 4 PA8030 units that I have to 2.8 and definitely am seeing increased stability and performance. I also own two PA9020 units and am wondering if a similar thing could be done. I have not had any luck finding firmware files for the BCM60500 chipset however. Any hints as to where I can start looking? Thanks
  0  
  0  
#56
Options
Re:Firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-11-10 22:26:11

@goggles8 

 

I don't think there is firmware available for BCM based devices.

  0  
  0  
#57
Options
Re:Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2020-11-11 14:31:58

@Orio76 What kind of sorcery is that? I have a TL-WPA8630P KIT V2 EU (TL-WPA8630P & TL-PA8010P) stuck on version 2.0.3 and would like to upgrade but I can't manage to get tpPLC to accept NVM + PIB files for TL-WPA8630P, either ethernet or wifi. What was the previous firmware version on the devices? Any additional step you might be forgetting to mention?

 

Thanks

  0  
  0  
#58
Options
Re:Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2021-01-18 07:04:54 - last edited 2021-01-18 07:09:38

Try it with the tool from post #43. The bin file is for the Wifi part. PIB (post #55) and NVM file are for the powerline part.

  0  
  0  
#59
Options
Re:Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2021-01-31 18:22:40 - last edited 2021-02-02 20:15:46

Thank you all, I was able to upgrade both devices of the TL-WPA8630P-EU-V2-kit to powerline (PLC) version 2.8.0.0030. The rest (WIFI) is still on 2.0.3 Build 20171018 Rel.36564.

 

TL-PA-8010P-EU-V2: with the tpPLC utility; NVM: QCA75XX-2.8.0.0030_modules_5-6_stripped.nvm; PIB: TL-WPA8630Pv2.PIB (from firmware package by @turboleak; post #26 by @turboleak)

TL-WPA8630P-EU-V2: with the old TP-Link utility that uses nvm and pib files (PowerLine.exe; post #43 Zyxel Utility failed); NVM: QCA75XX-2.8.0.0030-TL-WPA8630Pv2.nvm (from post #1); PIB: TL-WPA8630Pv2.PIB (post #55 by @Orio76)

 

@rmfigas maybe you could try this method.

 

Extract PIB (and NVM) file over the network

You can extract the pib file (and nvm file) from (all) the adapters over the network with their mac addresses.

 

@plctool -i 1 -p UNIQUE_DEVICE_NAME.PIB MAC-ADDRESS

 

Change PIB.BAT:


@echo off
@set PLCTOOL=%CD%
@plctool -i 1 -p DEVICE.PIB local

 

to (example, use your own device names and mac addresses)


@echo off
@set PLCTOOL=%CD%
@plctool -i 1 -p DEVICE_1_C47154FFB911.PIB C4:71:54:FF:B9:11
@plctool -i 1 -p DEVICE_2_0C8063EEF4A3.PIB 0C:80:63:EE:F4:A3

 

Change 'local' to the mac addresses of the devices in your network.

I have a VPN-installed and '-i 1' for the network adapter didn't work and generated empty pib files. Just try '-i 2', '-i 3', etc. On my PC network adapter '-i 5' generated the correct pib files of ± 22 kb in size.

 

Local device is the device with one network connector [host device]

Remote device(s) is (are) the device(s) with three network connectors [cliënt device(s)]

 

It is also possible to write nvm or pib files to the devices in the network. with '-N' and '-P' but I haven't done or tested this.

  1  
  1  
#60
Options
Re:Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.8.0.0030
2021-02-03 19:13:49 - last edited 2021-02-03 19:22:23

I contacted TP Link support and they wouldn't provide the nvm and pib files for the TP-Link TL-WPA8630PKIT-V2 (EU) to upgrade the PLC Qualcomm chipset firmware to the latest available version.

 

I read that this upgrade increases or improves the connection speed and network statiblity so I took the risk of upgrading the firmware by following the upgrade procedure mentioned in this forum thread and the chipset firmware is now successfully updated to QCA75XX-2.8.0.0030.

I can confirm that the reported connection speed is 25% higher than before tpPLC Utility and AVM FRITZ!Powerline Utility 1.0.3 report the same TX and RX speeds.

 

 

 

 

  0  
  0  
#61
Options
Re:Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.10.0.0032
2021-02-13 20:44:44

Firmware QCA75XX-2.10.0.0032 is up.

  1  
  1  
#62
Options