@Cashm Yes, that should be fine. You can use powerline adapters to set up Deco units via Ethernet Backhaul. If you use the powerline adapters, at least for ours there is a powerline LED light that...

@srand15 Try setting a static IP for the TV. Adding a device to static DHCP means whatever IP address the device has the Zyxel bind the MAC address of that device to that IP so it does not change.

@Richardrw You can mix any of the Deco models so if you have an existing M9 network, you can add an M5 via Wi-Fi.

@N1ch0l2s Your Xfinity gateway is blocking the port because that is also a firewall so doing port forwarding in the A9 is not enough. Just like you did port forwarding in the Archer A9, you need to...

@Jeepstone Not if the AV1000's are wired only. There is also the tpPLC smartphone app you can try as well, but to get a GUI like the 4220, you would use a wireless powerline adapter like the...

@Boll For the node to blink red means there is a network error or the node is no longer getting an IP address. Usually, it means the node is too far from the other Deco nodes so moving it closer...