Switches
TP-Link Business Switches are comprised of JetStream series and LiteWave series, which are designed to offer reliable and professional choices to businesses of all sizes. Anything related to TP-Link's JetStream or LiteWave Switches, welcome to ask questions, join discussions and share your experience/ knowledge here.
Switches
Hi, Can anyone advise if the SFP port on a SG2210MP will provide POE to an OC200 controller. Cheers
1Helpful
435Views
Hello Everyone, please can I use one of the PoE switch to connect to another poe switch since I only have one uplink on the TP-Link TL-SG1005P2 because I need two uplink to interneconnect the POE swit
0Helpful
1658Views
Hello, I have a problem. Today i wanted to configure a new switch that we bought and when i wanted to set Switchport mode access to some ports I could not do it. Turns out that TP Link deleted the opt
By
CusBusAutobus
· Latest post 2021-10-26 03:57:07
by Virgo
0Helpful
438Views
I have a TL-SG1016DE Ver 3 with the latest firmware. It keeps dropping connectivity to cabled clients that turn off. The clients get the 169 default address. The only way to clear it is to drop the po
By
Da_Gunny_USMC
· Latest post 2021-10-24 10:50:14
by Bubli
2Helpful
4088Views
Hi, Need some help. I recently had installed ethernet cables to four rooms in the house. Using a TL-SG108E switch. When I run some of the house deciveson Ethernet the devices still on Wifi can be effe
0Helpful
210Views
T1700G-28TQ V3 All settings default except: VLAN 1 interface ip 192.168.1.1 255.255.255.0 port 1/0/1 VLAN 10 interface ip 192.168.10.1 255.255.255.0 PVID 10 port 1/0/2 PC1 conected to port 2 ip 192.16
By
binio
· Latest post 2021-10-22 14:24:14
by erhan_ertem
0Helpful
1218Views
When creating a LAG LACP, I followed the steps from: https://www.tp-link.com/us/support/faq/991/ Previously I performed a system reset. Then went L2 Features>LAG>LACP Config /Global Config I selected
1Helpful
401Views
Hello I have bought 3 TL-SG108E switches because they are manageable and i also have other bigger TP-LINK switches. 1.Configured the switches but to my surprise i cannot find any option to configure S
By
ger1820
6Helpful
585Views
Model : Hardware Version : Not Clear Firmware Version : ISP : Model : TL-SG2210P Hardware Version :1.0 Firmware Version : TL-SG2210P_V1_150427 Just got the device and can`t find some features like blo
0Helpful
886Views
Hello, I have the following setup. The issue is multiple VLANs on one port in this case P2 coming from unRAID server. pfsenese --> port 1 Tagged VLAN5 on unRAID --> port 2 Tagged VLAN6 on unRAID --> p
0Helpful
1215Views