Requests & Suggestions
1
VotesI suggest to add more users/permissions and control in cameras folder. THANKSSSSS! I hope you can patch this in the future!
89Views
0
VotesFuture ConsiderationER707-M2 and multiple public IP addresses when using PPoE
I have a ER707-M2 v1.0 WAN connected via PPPoE. This means I cannot define a static WAN IP address. A static WAN IP address is a requirement for One-To-One NAT to be able to use multiple public ip add
260Views
1
VotesHello! It would be great if they could add a function to create a VTI (Virtual Tunnel Interface) for IPSec for Site-to-Site VPN. This technology is implemented starting from Cisco / Huawei equipment a
VPN
97Views
3
VotesJust like some other switchs, it would be useful to have the POE auto recovery function in the ER7212PC to be able to reboot a PD (powered devide) when it doesn't respond.
Poe
By
Martstl
· Latest post 2024-02-15 11:43:07
by wilsonlspacheco
224Views
7
VotesFuture ConsiderationAdd the possibility to set the "online detection interval" in standalone mode
The ER605, in standalone mode, does not have the ability to set the "online detection interval": this interval time is used to check if wan in online or offline. This is a big problem for the users wh
283Views
1
VotesFuture ConsiderationSupport for RFC4638 (Greater MTU and MRU than 1492 on PPPoE links)
Feature request Is support for RFC4638 planned for this router (and also others). This solves many TCP clamping issues and improves your connection if using PPPoE links.
248Views
13
VotesWhen we want to add a OpenVPN server, the hostname field only accepts IP address, not domain name. Can you change the field rules so we can fill domain names too?
331Views
3
VotesHi, we are building up an Omada installation with a on premise SDN. There will be > 50 sites (restaurant chain; each store gets its own site). Currently, all APs are assigned to one "WiFi Site". Reaso
By
Honkman
· Latest post 2024-02-13 07:08:50
by IT_KA-Sulingen
226Views
0
VotesHi there, I'm using the EAP245(EU) HWV3 Firmware 5.1 access point in standalone mode. It reports its device name as EAP and I would like to be able to change that name to match the rest of my installa
By
donnerluetjen
· Latest post 2024-02-10 14:28:21
by Stoinov
183Views
13
VotesDeclinedTreat ER7212PC as a Switch in ACL (ability to deny communication from one network to another)
Dear tp-link! I'd like to ask to support ACL configuration for ER7212PC as it's done for Omada Switches. In fact ER7212PC manages networks, and it's strange that I can't create an ACL rule to prevent
753Views