TL-R600VPN - No internet connections

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-R600VPN - No internet connections

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-R600VPN - No internet connections
TL-R600VPN - No internet connections
2019-10-09 03:01:33 - last edited 2021-04-19 11:51:29
Model: TL-R600VPN  
Hardware Version: V4
Firmware Version: 4.0.3 build 20180530 Rel. 63202

Hi Support

 

Good day,

 

INTERNET: ISP modem/router has default gateway 192.168.254.254

ROUTER: TL-R600VPN default ip 192.168.0.1

SWITCH: Smart Managed D-Link DGS-1210-28

 

What i want to do on my topology, is to have different segment(vlan) inter-vlan and able to see each other also has internet connection.

 

Settings on my TL-R600VPN

 

***WAN1***

Connection type: Static IP                                  Connection Status: Connected

IP Address: 192.168.254.1                                 IP Address: 192.168.254.1

Subnet Mask: 255.255.255.0                              Subnet Mask: 255.255.255.0

Default Gateway: 192.168.254.254                    Default Gateway: 192.168.254.254

Upstream Bandwidth: 1000000                           Primary DNS: 8.8.8.8

Downstream Bandwidth: 1000000

MTU: 1500

Primary DNS: 8.8.8.8

Vlan: 140

 

***VLAN - VLAN***

VLAN ID             NAME                    PORTS                   DESCRIPTION

110                     vlan110                  3(TAG)                     default vlan for Lan

120                     vlan120                  3(TAG)                    default vlan for Lan

130                     vlan130                  3(TAG)                    default vlan for Lan

140                     vlan140                  1(TAG)                    default vlan for Wan

 

***VLAN - PORTS***

PORT                PVID                VLAN

Port1                 140                 10(UNTAG) 140(UNTAG)

Port2                  20                  20(UNTAG)

Port3                  1                    1(UNTAG) 110(TAG) 120(TAG) 130(TAG)

Port4                  1                    1(UNTAG)

Port5                  1                    1(UNTAG)

 

***MULTI-NETS NAT***

Name                                  Interface                         Source IP Range                  Status

Admin_dept                        WAN1                             172.16.10.0/24                      Enabled

Mixed_dept                         WAN1                             172.16.20.0/24                      Enabled

Accounting_dept                 WAN1                             172.16.30.0/24                      Enabled  

 

***Static Route***

Name                              Destination IP          Subnetmask              Next Hope               Interface       Metric           Status

Admin_dept                    172.16.10.0              255.255.255.0          192.168.0.126          LAN               0                 Enabled

Mixed_dept                     172.16.20.0              255.255.255.0          192.168.0.126          LAN               0                 Enabled

Accounting_dept             172.16.30.0              255.255.255.0          192.168.0.126          LAN               0                 Enabled

 

Settings on my Managed Switch

 

***Device information***

IPv4 Address: 192.168.0.126

Subnetmask:  255.255.255.0

Default Gateway: 192.168.0.1

 

***802.1Q VLAN Settings***

VID             VLAN NAME                Untagged                          Tagged

1                 default                          28

110             Admin_dept                  23-24                                 27

120             Mixed_dept                  13-22                                 27

130             Accounting_dept           01-12                                27

 

***IP Interface Settings***

Interface Name               Vlan Name                   IPv4 Address                Netmask                   Admin State                   Link Sate

System                            default                          192.168.0.126             255.255.255.0           Enabled                         Link Up

110                                  Admin_dept                  172.16.10.1                 255.255.255.0           Enabled                         Link Up

120                                 Mixed_dept                    172.16.20.1                255.255.255.0           Enabled                         Link Up                      

130                                 Accounting_dept            172.16.30.1                255.255.255.0           Enabled                         Link Up   

 

***Static Route Settings***

IPv4                       Netmask                    Gateway                   Metric                        Protocol                    Backup                   Status          

 0.0.0.0                  0.0.0.0                       192.168.0.1                1                              Static                          Primary                 Pending

172.16.10.0           255.255.255.0           192.168.0.1                1                              Static                          Primary                 Pending

172.16.20.0           255.255.255.0           192.168.0.1                1                              Static                          Primary                 Pending

172.16.30.0           255.255.255.0            192.168.0.1                1                              Static                         Primary                 Pending

 

 

Current Physical connnection from modem/router connected to tl-r600vpn at Port1 (Wan1) from there Port3 is connected to switch at Port27 (uplink port).

 

Now, inter-vlan can communicate each other, able to ping and see their files. Also each vlan can ping their default gateway like 172.16.10.10 able to ping 172.16.10.1 and

172.16.10.10 able to ping 172.16.20.20 and so on. The problem is each vlan has no internet connections.

 

Is there any problem with my configurations on my tl-r600vpn? because there is no issue with my switch and it is working fine.

the only issue is no internet connections.

 

 

thank you for your help in advance.

  0      
  0      
#1
Options
2 Reply
Re:TL-R600VPN - No internet connections
2019-10-09 09:57:02 - last edited 2021-04-19 11:51:29

@ken22 

 

1. Delete the following static routing. You don't need to set them.

172.16.10.0           255.255.255.0           192.168.0.1                1                              Static                          Primary                 Pending

172.16.20.0           255.255.255.0           192.168.0.1                1                              Static                          Primary                 Pending

172.16.30.0           255.255.255.0            192.168.0.1                1                              Static                         Primary                 Pending

 

2. Add port 27 of switch to VLAN 1 and tagged. Make port 3 of router as tagged for VLAN1. Between switch and router, they communicate with each other through VLAN 1. 

Because R600VPN cannot setup L3 interface, so they need to communicate with each other through VLAN 1.

 

3. Finally try to ping the router. If you can ping the router, then everything will be OK soon.

  0  
  0  
#2
Options
Re:TL-R600VPN - No internet connections
2019-10-10 06:39:45 - last edited 2021-04-19 11:51:29

@Andone

 

Hi Andone,

Good day

Thank you for your immediate response. finally, i'm done with my setup.

 

I appriciated with your help

 

 

take care 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1861

Replies: 2

Related Articles