Archer VR600 v2 firmware problem and other issues with DSL bridge
Hello,
I have a Archer VR600 v2 set up in DSL bridge mode with my main router.
I have updated to the latest firmware 0.4.0 0.9.1 v0074.0 Build 200701 Beta.71362n that came out.
There is no problem with internet and DSL on the clients, however, I cannot connect to my local NTP server from the modem itself anymore with this firmware.
Previous firmwares worked fine but this firmware is getting stuck at "Getting GMT...." messege.
My setup is like this:
TP-Link LAN1 connected to ROUTER WAN port.
TP-Link LAN2 connected to switch LAN 24.
Modem is on DSL Bridge mode.
There are two interface groups on the modem.
------------------------------------------------
GROUP1:
WAN and LAN1
DHCP: OFF
STATIC IP: 192.168.0.1
------------------------------------------------
GROUP2:
LAN2, LAN3, LAN4
DHCP: OFF
STATIC IP: 192.168.1.3
Group Isolation is enabled.
------------------------------------------------
The NTP server ip is 192.168.1.41
I can ping the ip address of the modem with no problem so 192.168.1.3 is reachable.
But modem cannot get the NTP for some reason. This problem is mostly with firmware I believe because with previous firmwares with this setup there is no issue.
The second thing I couldn't solve the internet access of the modem itself.
In theory modem should have access to internet coming from the LAN2 connection. However, it doesn't have internet access at all. I cannot check for firmware updates from the UI or connect to cloud services or even use the TP-Link ID login. I am getting "Internet is unavailable" messeges. How can I solve this?
Another thing I want to ask is with this setup I am constantly getting these messeges in my SYSLOG.
"V2 igmp router occured! Not matching ours V3."
I have mutlicast enabled for my ipcams but IGMP snooping is disabled for the GROUP 2 so I should not get any messeges.
Any help is appreciated.