Omada controlled ER605 (TL-R605) NAT Loopback support
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Publicly hosted services cannot be accessed from LAN at the moment using the public address.
This requires NAT Reflection / Loopback functionality.
Can we please have it supported on ER605 (TL-R605) with Omada?
This feature seems to be introduced to TL-ER6020 last year.
https://community.tp-link.com/en/business/forum/topic/150305?replyId=442242
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Dear @Moderator,
Moderator wrote
Publicly hosted services cannot be accessed from LAN at the moment using the public address.
This requires NAT Reflection / Loopback functionality.
Can we please have it supported on ER605 (TL-R605) with Omada?
If your ER605/ER7206 is running with the firmware 1.1.0 build 20210512, you may have a NAT loopback issue, discussed here.
Here is the beta firmware to fix the NAT Loopback issue:
ER605: ER605(UN)_V1_1.1.0_20210531(Beta)
ER7206: ER7206(UN)_V1_1.1.0_20210531(Beta)
Update on August 10, 2021:
The issue has been resolved on the new firmware 1.1.1, please visit the official website for an upgrade, or follow the post below:
[New Firmware] The firmware v1.1.1 has been released for both ER605 and ER7206 by August 9, 2021
*Any further questions/feedback on the new firmware above, please feel free to click Start a New Thread from HERE.
Thank you for your attention!
- Copy Link
- Report Inappropriate Content
R605 should support NAT loop back,
The latest firmware version is this one: ER605(UN)_V1_20210113
https://www.tp-link.com/us/support/download/er605/v1/#Firmware
Maybe upgrade the firmware can solve it?
- Copy Link
- Report Inappropriate Content
Dear @Moderator,
Moderator wrote
Publicly hosted services cannot be accessed from LAN at the moment using the public address.
This requires NAT Reflection / Loopback functionality.
Can we please have it supported on ER605 (TL-R605) with Omada?
If your ER605/ER7206 is running with the firmware 1.1.0 build 20210512, you may have a NAT loopback issue, discussed here.
Here is the beta firmware to fix the NAT Loopback issue:
ER605: ER605(UN)_V1_1.1.0_20210531(Beta)
ER7206: ER7206(UN)_V1_1.1.0_20210531(Beta)
Update on August 10, 2021:
The issue has been resolved on the new firmware 1.1.1, please visit the official website for an upgrade, or follow the post below:
[New Firmware] The firmware v1.1.1 has been released for both ER605 and ER7206 by August 9, 2021
*Any further questions/feedback on the new firmware above, please feel free to click Start a New Thread from HERE.
Thank you for your attention!
- Copy Link
- Report Inappropriate Content
@Moderator NAT Loopback doesn't work for me in ER605 with firmwares v 1.1.1 and 1.2.0 in standalone mode. Only works for UDP, not for TCP. Filed support ticket.
Update: It could be related to the fact that I use VLANs for local networks. But both devices are inside one VLAN.
- Copy Link
- Report Inappropriate Content
After some research I found that if virtual server is used - it works. But doesn't work for ports forwarded by UPnP.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4582
Replies: 4
Voters 0
No one has voted for it yet.