Business Community > Routers > New firmware ER605 1.1.0 build 20210512
< Routers

New firmware ER605 1.1.0 build 20210512

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

New firmware ER605 1.1.0 build 20210512

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
New firmware ER605 1.1.0 build 20210512
New firmware ER605 1.1.0 build 20210512
2021-05-29 16:58:19 - last edited 2021-05-31 04:19:40

Just installed the new firmware for ER605. Although didn't find a changelog. 
 

Details:

- version 1.1.0

- build 20210512

- release 47886

 

@Fae any changelog you can share?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:New firmware ER605 1.1.0 build 20210512-Solution
2021-05-31 03:44:51 - last edited 2021-08-10 07:30:00

Dear @TheMuk, @Vendo,

 

TheMuk wrote

I can also confirm the exact behaviour on the ER-7206. I also had to revert again. All my nasses, servers etc are not reachabele anymore internally over the FQDN with public IP... not funny.

 

Do you mean that the NAT Loopback stops working after you upgrade the ER605/ER7206 firmware to 1.1.0, while reverting it back to 1.0.1 can solve the issue?

 

Edit:

The NAT Loopback issue has been reported to the R&D team who will make a beta firmware to fix the issue with high priority.

 

I'll update the following post as soon as possible once the beta firmware is available.

NAT Loopback (Hairpinning) broken in Firmware 1.10 ER7206 and 605 URGENT FIX NEEDED!

 

Update on June 1, 2021: Here is the beta firmware to fix the NAT Loopback issue:

ER605: ER605(UN)_V1_1.1.0_20210531(Beta)
ER7206: ER7206(UN)_V1_1.1.0_20210531(Beta)

 

Update on August 10, 2021:

 

The issue has been resolved on the new firmware 1.1.1, please visit the official website for an upgrade, or follow the post below:

[New Firmware] The firmware v1.1.1 has been released for both ER605 and ER7206 by August 9, 2021

 

*Any further questions/feedback on the new firmware above, please feel free to click Start a New Thread from HERE.

 

Thank you for your attention!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#9
Options
20 Reply
Re:New firmware ER605 1.1.0 build 20210512
2021-05-29 19:30:49

At least of the new features is the option to do some tuning with the firewall.

 

  0  
  0  
#2
Options
Re:New firmware ER605 1.1.0 build 20210512
2021-05-29 19:43:50

@paderijk 

Nat loopback (hairpinning) was working before the update. After this update not anymore.

Is there some setting to enable this in the new firmware.

 

 

  0  
  0  
#3
Options
Re:New firmware ER605 1.1.0 build 20210512
2021-05-29 20:52:37

@PeterHor quickly checked it after your reply. Indeed it's not working... at least for TCP.
 

I use mosh (c mosh.org) for secure roaming connections to my Linux server.

 

Initiating a new sessions goes over TCP (ssh TCP/22), once in place it uses UDP (UDP 60000-65000).

 

creation of a new session fails (using TCP) from the LAN, while reconnecting to an existing session (UDP) works fine. 
 

So far I haven't found a setting to "fix" it. 
 

@Fae - any input?

  0  
  0  
#4
Options
Re:New firmware ER605 1.1.0 build 20210512
2021-05-30 02:48:36 - last edited 2021-05-30 02:49:44

@paderijk 

 

updated to 1.1.0 and started to be unable to see my Minecraft server which O have on my network and connecting to a domain which points to my IP.

 

was unable to figure out what to change.

 

had to move back to 1.0.1

  0  
  0  
#5
Options
Re:New firmware ER605 1.1.0 build 20210512
2021-05-30 20:40:45 - last edited 2021-05-30 20:41:03

@Vendo 

I can also confirm the exact behaviour on the ER-7206. I also had to revert again. All my nasses, servers etc are not reachabele anymore internally over the FQDN with public IP... not funny.

My Setup:TL-ER-7206, OC200, 3x EAP245, 1x EAP225, 1x EAP225-Outdoor Wishlist: 1x TL-SG2218 and 2x TL-SG2008
  0  
  0  
#6
Options
Re:New firmware ER605 1.1.0 build 20210512
2021-05-31 00:41:10

@PeterHor 

I just noticed the same with Home Assistant and loopback not working. Looks like a firmware rollback is in my near future. 

  0  
  0  
#7
Options
Re:New firmware ER605 1.1.0 build 20210512
2021-05-31 03:41:54

Dear @paderijk,

 

paderijk wrote

Just installed the new firmware for ER605. Although didn't find a changelog. 
 

Details:

- version 1.1.0

- build 20210512

- release 47886

 

@Fae any changelog you can share?

 

Check this firmware link, https://www.tp-link.com/en/support/download/er605/#Firmware

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#8
Options
Re:New firmware ER605 1.1.0 build 20210512-Solution
2021-05-31 03:44:51 - last edited 2021-08-10 07:30:00

Dear @TheMuk, @Vendo,

 

TheMuk wrote

I can also confirm the exact behaviour on the ER-7206. I also had to revert again. All my nasses, servers etc are not reachabele anymore internally over the FQDN with public IP... not funny.

 

Do you mean that the NAT Loopback stops working after you upgrade the ER605/ER7206 firmware to 1.1.0, while reverting it back to 1.0.1 can solve the issue?

 

Edit:

The NAT Loopback issue has been reported to the R&D team who will make a beta firmware to fix the issue with high priority.

 

I'll update the following post as soon as possible once the beta firmware is available.

NAT Loopback (Hairpinning) broken in Firmware 1.10 ER7206 and 605 URGENT FIX NEEDED!

 

Update on June 1, 2021: Here is the beta firmware to fix the NAT Loopback issue:

ER605: ER605(UN)_V1_1.1.0_20210531(Beta)
ER7206: ER7206(UN)_V1_1.1.0_20210531(Beta)

 

Update on August 10, 2021:

 

The issue has been resolved on the new firmware 1.1.1, please visit the official website for an upgrade, or follow the post below:

[New Firmware] The firmware v1.1.1 has been released for both ER605 and ER7206 by August 9, 2021

 

*Any further questions/feedback on the new firmware above, please feel free to click Start a New Thread from HERE.

 

Thank you for your attention!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#9
Options
Re:New firmware ER605 1.1.0 build 20210512
2021-05-31 03:52:34

@Fae 

 

yes, reverting back to 1.0.1 helped to fix the issue. 

  2  
  2  
#10
Options
Re:New firmware ER605 1.1.0 build 20210512
2021-05-31 04:01:39

Dear @Vendo,

 

Vendo wrote

yes, reverting back to 1.0.1 helped to fix the issue. 

 

Noted, thank you for verifying the information.

 

You may stay with 1.0.1 firmware at present, and wait for the beta firmware as I mentioned above.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 5455

Replies: 20

Related Articles
【Update 31/5/2021】Firmware releases for ER605 and ER7206 - ISSUE
2723 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.