TL-R605 DHCP not assigning correct static IP
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
any idea why static addresses are not assigned as parametrized in Omada? This happens all the time and in case of IP cameras it is an issue...
thanks,
Norbert
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Dear @Norbert_123,
Norbert_123 wrote
any idea why static addresses are not assigned as parametrized in Omada? This happens all the time and in case of IP cameras it is an issue...
Sorry for the late response! If the DHCP reservation still doesn't work with the latest controller version and gateway firmware, you may try the Beta firmware from the solution post below:
Solution ER605 ER7206 - “Use Fixed IP Address” (DHCP Reservation) Doesn't Take Effect
If the issue still exists, please don't hesitate to comment in the solution post above for further assistance.
- Copy Link
- Report Inappropriate Content
How about rebooting the router and camera? Do you mean that this issue happens many times after you set up a static IP address for all your clients? By the way, is it happening on Controller Software or OC200?
- Copy Link
- Report Inappropriate Content
Same story and for me. Specially when you assign static ip's to cameras always after the lease time new ip
- Copy Link
- Report Inappropriate Content
Having issues as well trying to get fixed (static) ip address assignments to stick. I'm using the Omada Controller V4.3.5 (managing TL-R605).
For wireless clients, forcing a reconnect in most cases gets the fixed address assigned but it eventually changes (regardless of the length of the DHCP lease)
- Copy Link
- Report Inappropriate Content
@Norbert_123 I am having exactly teh same issue, the R605/ omada control softtware keeps assigning different IP adresses to devices taht have a specificed static IP address.
@TP_LINK any ideas when this will be fixed at it is a major issue?
- Copy Link
- Report Inappropriate Content
I have the same issue. latest firmware.
Ip cameras (tp link tapo, connected via wifi) keep changing their ip address.
I need to reconnect, but meanwhile, no videosurveillance. I cannot reach them via custom hostname too.
And I cannot find anywhere the Ip&Mac binding function...
- Copy Link
- Report Inappropriate Content
@PaqPal Using the 605 router adopted to omada...Static ip does not work..I use amcrest nvr with some ip cams and they keep going offline...System it broke..I should of keep my Firewall gold in line...I bought the router a while back and wanted to have my whole setup Omada controlled...
- Copy Link
- Report Inappropriate Content
Dear @Norbert_123,
Norbert_123 wrote
any idea why static addresses are not assigned as parametrized in Omada? This happens all the time and in case of IP cameras it is an issue...
Sorry for the late response! If the DHCP reservation still doesn't work with the latest controller version and gateway firmware, you may try the Beta firmware from the solution post below:
Solution ER605 ER7206 - “Use Fixed IP Address” (DHCP Reservation) Doesn't Take Effect
If the issue still exists, please don't hesitate to comment in the solution post above for further assistance.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2144
Replies: 8
Voters 0
No one has voted for it yet.