Firmware Update impossible Archer MR600
Hello,
it seems like im facing issues with my TP-Link Archer MR600 and can not solve them by myself.
I would like it to update to Firmware "Archer MR600(EU)_V2_210914", because there ist WPA3 mentioned which I would like to activate. Also the 4G / 3G Bug seems to be resolved.
on the Firmware update Tab it always says my Firmware is up to date and when I try to update it via the downloaded file the upload stops around 33 % with Error code 4503:
Is there anything I'm doing wrong or do I have to change some setting first?
Thanks in advance for your help :-)
Best regards, Tim
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Sunshine Hi Sunshine
The provider is MTN, nothing is wrong with the router, but MTN keeps suspending the SIM
Get replies:
Unfortunately The device is not supported by MTN.
-----
Good day,
MTN only approve the following device and not any other TP-link
TP-LINK: Archer MR600 (EU) 2.0
-----
Sorry for the late response
Yes it is locked please see reason below and advice if you are connected on the correct device
Reason: Subscriber connected from an invalid device
- Copy Link
- Report Inappropriate Content
I have also the same issue. I have sent you a private message, please have a check. Thanks very much!
- Copy Link
- Report Inappropriate Content
Hi, we have no middle firmware for MR600(ZA) V2 to install EU version firmware, and based on the MTN's reply, it might not be firmware limit, maybe it is limited through something else such as device MAC address etc., it is recommended to contact the local support team in South Africa to report this issue.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Sunshine Same problem with my Archer MR600, will send you a private message now.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
I'm facing the same issue as many others in this thread with my Archer MR600v2, I cant proceed to firmware upgrade :(
Here are firmware info :
Firmware Version: 1.4.0 0.9.1 v0001.0 Build 210805 Rel.63527n
Hardware Version: Archer MR600 v2 00000002
And this is the error i have when I try to flash :
Error code: 4503
The uploaded file was not accepted.
I've tried all available firmwares on the support page.
As others, is it possible to help me to solve this problem ?
I really appreciate any help you can provide.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello,
The provided beta firmware works well, I'm now able to upgrade to the latest official version, that's quite fine !
Thank you very much for your help :)
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 14212
Replies: 124
Voters 0
No one has voted for it yet.